Material decision tool

Sportswear Fabric Specification Guide

Compare sportswear fabrics by identified source, composition, nominal weight in g/m², structure, sample status and claim-specific evidence.

HTML PREVIEW

See the structure before you download.

The important fields remain readable on this page. The Excel file adds editable cells, dropdowns, checks or formulas where relevant.

Material IDCompositionNominal weightStructureEvidence note
KITOEM-FAB-B09100% polyester140 g/m²Double-faceOwner confirms laboratory testing; report details not supplied
KITOEM-FAB-C0495% polyester / 5% elastane160 g/m²TexturedRecovery method and result not supplied
KITOEM-FAB-A0192% polyester / 8% elastane190 g/m²Geometric jacquardLaboratory identity, method and result not supplied
THREE SOURCE-BACKED CANDIDATES

Compare the record.
Then compare the sample.

These are candidate fabric references, not a default bill of materials for any garment. Weight alone does not establish breathability, drying, recovery, opacity or durability.

B09

Double-face

Composition
100% polyester
Nominal weight
140 g/m²
Sample question
Review drape, coverage and artwork on the finished garment.
Evidence boundary
Owner-confirmed catalogue record. Laboratory identity, report, method and individual results are not supplied.
C04

Textured

Composition
95% polyester / 5% elastane
Nominal weight
160 g/m²
Sample question
Review movement, recovery requirement and print compatibility.
Evidence boundary
Owner-confirmed catalogue record. Laboratory identity, report, method and individual results are not supplied.
A01

Geometric jacquard

Composition
92% polyester / 8% elastane
Nominal weight
190 g/m²
Sample question
Review whether the surface pattern supports the artwork and garment structure.
Evidence boundary
Owner-confirmed catalogue record. Laboratory identity, report, method and individual results are not supplied.
WHAT IT RECORDS

Keep the decision fields together.

  • Material ID and source
  • Composition
  • Nominal weight in g/m²
  • Knit or woven construction
  • Visible structure
  • Handle or stretch direction
  • Intended product
  • Physical sample identity
  • Test method or report
  • Open questions
HOW TO USE IT

Move from draft to approval.

  1. 01

    Give every physical reference a stable material ID.

  2. 02

    Record composition, nominal g/m² and construction separately.

  3. 03

    Connect the reference to an intended garment and decoration route.

  4. 04

    Confirm the physical sample before approving a product.

  5. 05

    Request test evidence only for claims the project actually needs.

COMMON FAILURE POINTS

What the tool is designed to prevent.

01

Using GSM as a synonym for breathability.

02

Treating a commercial fabric name as a complete specification.

03

Inferring drying, UV, recovery or colourfastness from composition.

04

Mixing supplier card data with independent laboratory evidence.

FAQ

Use the file with the right boundaries.

Does a heavier fabric automatically perform better?

No. Mass per area is only one specification field and does not establish air permeability, drying, recovery or durability.

Are the listed materials independently laboratory verified?

The collection data is company-confirmed, but laboratory identity, report number, method and individual results were not supplied for these records.

Why is a physical sample still required?

It connects the written record to the actual material and lets the buyer review handle, colour, finish and product suitability.

READY TO APPLY IT

Download the tool or carry the brief into an enquiry.

Start a project