Share your organisation type, target market, product or sport, estimated quantity for each item, wearer group, destination country and required arrival date. Add available logos, artwork, references, size information and packaging needs. A complete technical pack is useful but is not required for the first review.
Starting a project and comparing quotations
Yes. Start with the commercial brief: who the product is for, how it will be used, approximate quantity, target market, destination and timing. KITOEM can then identify the decisions needed before a product-specific quotation, sample route or production approval is possible.
The written quotation should identify every product line, quantity basis, agreed customisation and the commercial assumptions used. Sampling, special packaging, freight, duties, testing or other separately charged work should be shown clearly instead of being hidden inside one unit price.
Compare the same garment specification, quantity, size mix, artwork, labels, packaging, sample route, inspection scope, Incoterm and destination. A lower unit price is not directly comparable if fabric, construction, personalisation, freight or approval work is different.
KITOEM’s confirmed own-production focus is football kits, basketball uniforms, training apparel and outerwear. Any supporting product, accessory, specialist process or partner-facility role should be identified for the selected project and recorded in the written quotation before approval.
Products, artwork and private-label requirements
Current own-production focus covers football kits, basketball uniforms, training apparel and outerwear. Other team, event, bag or accessory requirements can be included in the brief for a separate feasibility and sourcing review; catalogue presentation alone does not confirm availability.
An OEM or development enquiry can begin with a technical pack, measurement specification, bill of materials, pattern information or an approved reference sample. Feasibility, material access, development work and production responsibility are then confirmed for that specific product.
Personalisation can be requested. The selected product, method, placement, spelling, number, size and quantity must be controlled in one final roster and approved before production release. Mixed-size and personalisation conditions are confirmed for the order.
Send Pantone references where available, together with logos and an explanation of which colours are critical. The achievable result depends on material and application method, so the approval reference and any acceptable tolerance should be agreed for the selected product before bulk production.
List every brand and retail requirement separately, including neck or woven labels, care information, size stickers, barcode data, hangtags, bags and cartons. Availability, minimums, artwork, compliance content and cost are confirmed item by item in the quotation.
Minimums, mixed sizes and multi-product orders
KITOEM’s current factory guidance is typically 60–100 sets for standard project orders. Fully custom projects normally start at 300–500 pieces. The applicable unit, split by style or colour and final MOQ are confirmed against the selected product and written quotation.
Provide the expected size range and quantity by wearer group. Whether sizes can share one minimum depends on the selected style, pattern set, material and production route, so adult and youth availability must be confirmed before the final roster is collected.
One project brief can contain multiple product lines and separate quantities. Each garment or accessory still keeps its own specification, MOQ, sample decision, approval record and price. Consolidation or a combined shipment is confirmed only after every product route is known.
Describe the pilot objective, quantity, sizes, branding and what must be tested. KITOEM can review a trial structure, but the applicable minimum, sample cost, tooling, labels, packaging and later scale-up terms remain product-specific.
Send the quantity required for each colour and design. Shared patterns or materials may help the review, but separate fabric, trim, artwork or setup minimums can still apply. The quotation should show the allocation rather than assume all colours share one minimum.
Samples, sizing and release decisions
The suitable route may be a fit sample, material or colour reference, development sample or custom pre-production sample. Sampling takes 15–20 days; availability, fee, starting point, approval scope and shipping are confirmed for the actual project through an enquiry.
Sample cost depends on the product, artwork, pattern or tooling work, materials, trims and shipping. Any credit against a qualifying bulk order must be written into the quotation; it should not be assumed from a general sample policy.
A fit sample helps assess measurements and wearer fit, while a pre-production sample is intended to represent agreed product details before bulk release. One sample may not prove every colour, size, material lot, packaging component or mass-production condition, so record exactly what is being approved.
Check product identity, measurements, fit, construction, fabric reference, colour, artwork placement, spelling, names and numbers, labels, trims and packaging that are within the sample scope. Send one consolidated approval or change list with a clear version number.
A change after approval can affect price, material availability, artwork, tooling, production timing and the need for another sample. Ask for the revised specification and commercial impact in writing before the order is released again.
Clubs, schools, academies and fixed-date events
A coordinated visual direction can be discussed, but the available pattern, proportions, safety details and size range must be checked for each selected garment. Do not collect the final roster until the adult and youth product options are confirmed.
Work backwards from the required arrival date, not only the event date. Allow separate time for product decisions, artwork, sample or sizing review, roster approval, production, inspection, international transport, customs and final delivery. Send the destination and fixed date in the first enquiry.
Describe the required grouping, label data and handover process before quotation. The feasibility, privacy handling, packing method, extra materials, labour and cost must be confirmed for the exact order; adding a roster to the brief does not automatically confirm this service.
List each team, department or cost centre as a separate line with its artwork, product and quantity. Shared materials or specifications may simplify development, while pricing, minimums, approvals, packing and invoicing still need a written project structure.
Request the complete set and state the quantity needed for each piece. The quotation should say what is included, which items are optional, who supplies each component and whether separate minimums, samples or delivery conditions apply.
Production timing, inspection and quality control
In-stock dispatch takes 7–10 days, subject to stock availability and the start date agreed in the written quotation. Stock-style customisation is normally completed within 15 days, and fully custom production takes approximately 25 days. Sampling takes 15–20 days, with its own agreed starting point. Production and dispatch periods exclude international freight, customs and final delivery unless the quotation states otherwise. Confirm the required arrival date and each approval milestone separately.
The starting point should be written into the order record. It may depend on payment, final specification, approved artwork, sample decision, roster, materials or other project inputs being complete. Do not plan from a lead-time number without its start condition.
An independent inspection request can be included in the project plan. Agree the inspector, inspection stage, sampling method, specification, defect criteria, access, reporting and who can authorise release before the balance-payment and shipment terms are finalised.
Keep the approved sample or agreed reference together with the final measurement sheet, artwork, colour and construction specification. The inspection plan should identify which features are checked, the tolerance or acceptance rule and who has authority to release the shipment.
Record the carton and product references, quantities affected, measurements and clear photographs before goods are redistributed or altered. Compare the evidence with the approved specification and notify the project contact promptly so the cause and proposed resolution can be reviewed in writing.
Packaging, freight and import planning
State whether you need standard protective packing, individual bags, size stickers, player or team labels, retail packaging, barcodes, inner cartons or special outer-carton marks. Packaging artwork, minimums, compliance content, dimensions and cost are confirmed separately.
Individual packing can be requested. Provide the required label fields, sorting logic, bag or box specification and final data deadline. Feasibility and cost depend on the product mix and level of sorting and must be included in the written quotation.
Ask for the Incoterm and named place that match your importing capability. Each term changes which party handles export, freight, customs, duties, tax and final delivery. Confirm the supported route and responsibilities for the destination in the current quotation.
Provide the delivery country, postcode, address type, required arrival date and any unloading or appointment conditions. A delivered estimate should separate products, packaging, freight and known service charges, and state whether duties, taxes or customs costs are included or excluded.
Responsibility depends on the product, target market, buyer role and agreed Incoterm. Tell KITOEM where and how the goods will be sold so required documents, labels or tests can be identified. Market-specific requirements require compliance verification before publication or order approval.
Repeat orders, continuity and design records
A repeat order is reviewed against the original approved files, pattern or measurements, material and trim availability, quantity and current production conditions. Refer to the previous order and identify every intended change rather than assuming an identical result is automatically available.
Send the previous order reference, product, size, personalisation and quantity required. Small top-ups may face different minimums, setup cost, material availability or colour variation, so the applicable route and price must be confirmed for the repeat order.
Keep the approved colour and material references, product specification and order records. For a planned programme, discuss material continuity and reorder timing early. Even with the same reference, a new material lot may require review before production.
Keep the quotation, product code, final artwork, colour references, measurement specification, approved roster, sample or approval version, packaging files, inspection report and order reference. Mark which fields may change and require new approval on a repeat order.
KITOEM’s public marketing policy does not use customer identities, private designs, rosters or order details. Only send information needed for the project. Contractual confidentiality, intellectual-property ownership, retention and access requirements should be agreed in writing for the specific relationship.
Turn the remaining questions into one clear brief.
Send the products, quantities, users, destination and required arrival date. We will identify which details still need specification, sampling or written confirmation.